FIREFLY™ Phoenix offers temporary fire protection for Fenchurch Street offices

LISTEN HERE

The refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ Phoenix smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.

The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the Phoenix around the atrium, as well as other passive fire protection measures as the scheme evolves.

In total T&R has fixed 22 rolls of the lightweight Phoenix material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.

IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height – once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.

The Site Manager for T&R Fire Protection, Tom Port Smith, commented:

“We’ve used Phoenix and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA’s FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”

Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY’s premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.

FIREFLY™ Phoenix is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.

Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

info(Replace this parenthesis with the @ sign)tba-pt.com
www.tbafirefly.com